Knowledge · Air traffic controller shifts
Day. Night. Off. How air traffic controller shifts work: patterns, hours and the rules behind the roster
Ask a controller how long a shift lasts and you get a question back: at which unit? Shift length, breaks and nights differ from tower to area control centre and from country to country. This page explains the common patterns and what European and US rules actually require, every figure with its source.
- 8 h 14mean shift length in the EASA roster analysis
- 2nights in a row: the limit sleep science recommends
01 / 08
Why the sky never closes
Operating hours decide whether a unit needs a night shift at all.
At three in the morning the radar room is quiet, but it is not empty. Cargo and mail flights, long-haul arrivals, ambulance flights and military traffic keep moving through the night, and the airspace they use has to be controlled. That is why many air traffic control units are staffed around the clock, every day of the year.
Many, not all. A regional tower may close in the evening; an approach unit may hand its airspace to a neighbouring unit for the night. EU law reflects this: the limit on night duties in a row applies only where the unit's operating hours make it relevant. In the EASA roster analysis published in 2024, all but one of the participating providers worked night duties, though not in every centre.
Each unit has fixed operating hours, and they set the frame for everything on this page. A unit that closes at 22:00 plans early and late shifts. A unit open around the clock needs a night shift, and with it the rest rules that make night work the hardest part of any roster.
02 / 08
Typical shift patterns
Forward rotation, short blocks, then days off.
Most European rosters follow one idea: shifts move forward through the day. Early shifts come first, then late shifts, then nights, followed by days off. The 2024 EASA study found that most rosters it analysed rotate this way, clockwise and fast, with two or three shifts of the same kind before the type changes. Slow rotations were in the minority.
The reason is the body clock. It shifts later more easily than earlier, so start times that move later are easier on sleep than start times that jump back. The study's guidance therefore recommends fast clockwise rotation, at most one change of shift type per cycle, and days off in blocks of at least two rather than single days. Real rosters come close, as its analysis of 24 rosters from 16 providers shows:
- Mean shift length 8 hours 14 minutes. Some duties last over 11 hours, mostly nights and standby, and are always followed by adapted rest.
- Early shifts in every roster, none starting before 05:00 local time, usually two or three in a row.
- Few night shifts, never more than two in a row.
- On average 35 hours 36 minutes per week, with single weeks between 13 and 65 hours.
- Days off regularly in blocks of at least two.
Units organise this in two broad ways. Some run a fixed rotation: one cycle repeats, and several watches go through it offset against each other, so every day is covered. Others plan each controller individually, month by month, against demand, leave and training. EUROCONTROL's 2023 rostering guidelines treat fixed or flexible patterns, team or individual rosters and forward or backward rotation as choices each unit makes for itself.
For example, one reference cycle in the EASA study is two 12-hour day shifts from 06:00 to 18:00, two 12-hour nights from 18:00 to 06:00 and four days off. It is an example, not a standard. EU law prescribes no pattern.
03 / 08
Time on position and breaks
How long a controller works a frequency before someone takes over.
A shift is not eight hours of talking to aircraft. It is split into sessions on position, separated by breaks in which someone else takes over the frequency. EU law defines a break as time within the duty period in which the controller has no duties, for recovery. How long a session may last, it does not say. Each provider sets its own maximum time on position without a break and its own ratio of duty to breaks, as two of the eight elements of its rostering system.
The values differ widely. In the 2024 EASA survey, providers reported an average maximum of 90 minutes without a break for area control centres and 154 minutes for towers, with a wide spread in both. The study did not analyse why towers allow longer sessions; it names the type of task and the operating conditions as possible reasons.
Why limit it at all? Fatigue builds with time on task, and faster when traffic is heavy. Research summarised in the fatigue guide by ICAO, CANSO and IFATCA found fatigue ratings fairly stable for up to four hours of continuous work at low workload, but rising quickly after two hours when workload was high. The EASA study measured the effect directly: every additional hour in one work session raised the risk of critical fatigue by 33 percent.
Breaks have a cost too. Every handover is a moment in which information can get lost, and the ICAO guide notes that fewer handovers can sometimes mean lower overall risk. Break planning is therefore a deliberate trade-off, which many units make on the day itself, depending on traffic and who is on shift.
04 / 08
What the rules say: Europe
Eight elements in the law. Each provider sets the values.
In the EU the core rule is ATS.OR.320 of Regulation (EU) 2017/373. Every air traffic control service provider must run a rostering system that manages fatigue through a safe alternation of duty and rest, and must define eight elements in it. They are listed below, followed by the averages that 36 of the 46 EU providers reported to EASA for 2023, area control centre (ACC) first, tower (TWR) second.
The regulation itself contains no figures. Each provider sets its own values, based on scientific principles, its own data and best practice according to EASA's guidance material, and must consult the controllers who will work the roster. For the two night elements, EASA's acceptable means of compliance count midnight to 05:59 as night time. National working-time law and collective agreements apply on top.
ATS.OR.315 covers fatigue itself: every provider needs a fatigue management policy and information programmes for its controllers. The acceptable means of compliance add procedures for reporting fatigue, for considering it in occurrence investigations and for managing its effect on safety.
- 1 · The most working days with duty in a row
- 2 · The longest duty period in hours
- 3 · The longest time providing air traffic control without a break
- 4 · The ratio of duty periods to breaks while providing air traffic control
- 5 · The shortest rest period
- 6 · The most duty periods in a row that reach into the night, where the unit operates at night
- 7 · The shortest rest after a duty period that reaches into the night
- 8 · The fewest rest periods within one roster cycle
- 1 · Working days in a row, max.
- 5.9 ACC · 5.8 TWR
- 2 · Hours per duty period, max.
- 9.2 h ACC · 10.5 h TWR
- 3 · On position without a break, max.
- 90 min ACC · 154 min TWR
- 4 · Ratio of duty periods to breaks
- 0.69 ACC · 0.72 TWR
- 5 · Rest period, min.
- 11.6 h ACC · 12.0 h TWR
- 6 · Night duties in a row, max.
- 2.3 ACC · 2.9 TWR
- 7 · Rest after a night duty, min.
- 22.5 h ACC · 17.8 h TWR
- 8 · Rest periods per roster cycle, min.
- 3.7 ACC · 3.7 TWR
Source: EASA, Study on ATCO Fatigue, May 2024, Table 2-1, p. 25. These are reported averages, not recommended values. Behind each figure lies a wide spread, and the study notes that providers do not all read the terms the same way. In its action plan of June 2024, EASA announced that it would consider recommended reference values for the eight elements in future guidance material.
05 / 08
What the rules say: USA
Fixed figures, changed several times since 2024.
The United States takes the opposite approach. The FAA writes fixed limits for its controllers into one order, FAA Order JO 7210.3. In April 2024, after an independent expert panel raised serious concerns about controller fatigue, the FAA Administrator ordered longer rest between shifts. In July 2024 the FAA and the controllers' union NATCA agreed on the version that entered the order in January 2025: at least 10 hours off between shifts, and 12 hours off before and after a midnight shift, meaning a shift with most of its hours between 22:30 and 06:30.
The same agreement asked for alternatives to the counter-clockwise 2-2-1 schedule. It runs from two evening shifts to two early shifts to a night shift, often with only eight or nine hours between the last early shift and the night. Since then the rule has changed again, as the timeline shows.
- 19 Apr 2024
- FAA directive: 10 h off before any shift, 12 h before a midnight shift
- 19 Jul 2024
- FAA and NATCA agree: 10 h between shifts, 12 h before and after a midnight shift
- 12 Jan 2025
- In force through FAA Notice N JO 7210.953
- 1 Jan 2026
- 12 h before a midnight shift suspended for 2026 (N JO 7210.966, until 31 Dec 2026); 12 h after it remain
Other limits in the current order (JO 7210.3EE including change 3 of 9 July 2026): no more than 10 operational hours per shift, no more than six shifts without a regular day off, and at least 30 consecutive hours off in every seven-day period. Status of all US figures on this page: 15 November 2026. What applies from January 2027 had not been published in the FAA sources we checked.
06 / 08
Nights, fatigue and sleep
Why the night shift and the quick return are the hard parts.
The body clock never fully adapts to night work, however many nights you do. Alertness is lowest in the small hours, roughly between 02:00 and 06:00; ICAO calls this the window of circadian low. Sleep during the day after a night is shorter and less restful. In the EASA study, night duties raised the risk of critical fatigue by 253 percent against the baseline, more than any other factor it measured.
The guidance collected in the study turns this into a few planning rules:
- No more than two night shifts in a row.
- After a single night shift, at least one night free of duty; after two or more, at least two.
- After two or more nights, no morning shift before 72 hours of rest.
- Recovery needs two full nights of sleep. A 40-hour break from 20:00 gives most people that; a 48-hour break from midnight often does not.
- No early shift and night shift on the same day, even with ten hours in between.
That last point is the quick return. In the study's example, an early shift from 06:00 to 13:00 is followed by a night shift from 23:00. Ten hours lie in between, but at a time of day when real sleep is hardly possible. A study cited in the ICAO fatigue guide measured controllers on a 2-2-1 pattern: about two and a half hours of sleep between the morning and the night shift. The fatigue scoring matrix used in the EASA analysis recommends at least 16 hours between shifts. Most European gaps are longer, yet every provider in the sample had some shorter ones.
Fatigue is also managed after the roster is published. EASA's acceptable means of compliance expect procedures through which controllers can report fatigue, and a controller who doubts being able to work safely must not take the position and must tell the provider (Regulation (EU) 2015/340, ATCO.A.015). For the data side, ICAO defines the fatigue risk management system (FRMS): continuous, data-driven monitoring of fatigue risk, based on science and operational experience. Under ICAO Annex 11 every State must set prescriptive limits for controllers and may allow an FRMS in addition. ICAO Doc 9966 describes both approaches; EASA's guidance points to its chapter on the science of fatigue.
07 / 08
Questions we hear
Short answers, each with its source.
-
07.01
How long is an air traffic controller's shift?
It depends on the unit. In the EASA roster analysis the mean shift lasted 8 hours 14 minutes; duties over 11 hours were mostly nights or standby. European providers reported an average maximum duty period of 9.2 hours for area control centres and 10.5 hours for towers. In the US, the FAA limits a shift to 10 operational hours.
EASA 2024, pp. 25 and 43 · FAA JO 7210.3EE, 2-6-7
-
07.02
Do controllers work nights?
At units open at night, yes. All but one provider in the EASA sample had night duties, though not in every centre. In the rosters the study analysed, never more than two nights followed each other.
EASA 2024, p. 43
-
07.03
How many days in a row do controllers work?
Providers reported an average maximum of about six working days in a row, yet the rosters analysed rarely went beyond five. The FAA allows no more than six shifts without a regular day off.
EASA 2024, pp. 25 and 43 · FAA JO 7210.3EE, 2-6-7
-
07.04
How many hours a week?
In the EASA sample, 35 hours 36 minutes on average, but single weeks ranged from 13 to 65 hours. Most rosters included some weeks of more than 40 hours.
EASA 2024, p. 43
-
07.05
How long does a controller stay on position?
Each provider sets its own maximum. The averages reported to EASA were 90 minutes for area control centres and 154 minutes for towers. The FAA requires breaks of reasonable duration without fixing a length.
EASA 2024, p. 25 · FAA JO 7210.3EE, 2-6-6
-
07.06
Who sets the limits?
In the EU, each air traffic control service provider sets its own values for the eight elements of ATS.OR.320, after consulting its controllers and within national working-time law and collective agreements. In the US, the FAA sets them centrally in Order JO 7210.3.
Regulation (EU) 2017/373, ATS.OR.320 · FAA JO 7210.3EE
08 / 08
How a roster gets checked
Every entry against every limit.
Whoever builds the roster has to check every entry against these limits, and not only on the day it is published. Swaps, sick leave and overtime change the plan daily, and ICAO expects proof that the limits hold in the hours actually worked, not just in the planned ones. EASA's guidance names system support that flags critical points in advance as one way of doing this. Rostify checks each entry the moment it is made against the ATS.OR.320 rules set up for the unit: rest to the minute, duties and nights in a row, weekly hours and hours in a row.
- In Rostify
- Rest, fatigue and duty limits
Sources
Primary sources only, each checked on 15 November 2026. Page numbers refer to the printed pages of each document.
- Regulation (EU) 2017/373, Annex I definitions, Annex IV ATS.OR.315 and ATS.OR.320 (EUR-Lex)
- EASA Easy Access Rules ATM/ANS Provision of Services, revision March 2025: AMC and GM to ATS.OR.315 and ATS.OR.320
- EASA, Study on the Analysis, Prevention and Management of ATCO Fatigue, final report, 21 May 2024
- EASA, Action Plan on ATCO Fatigue, 7 June 2024
- EASA, Air traffic controller (ATCO) fatigue
- EUROCONTROL, ATS Operations Staff Rostering Best Practices and Tools Guidelines, edition 1.0, 26 April 2023
- ICAO, CANSO, IFATCA, Fatigue Management Guide for Air Traffic Service Providers, first edition 2016
- Regulation (EU) 2015/340, Annex I, ATCO.A.015 (EUR-Lex)
- FAA, Statement from FAA Administrator Mike Whitaker, 19 April 2024
- FAA, memorandum Updated Fatigue Rules, 19 April 2024
- FAA, FAA and NATCA reach agreement to address controller fatigue, 24 July 2024
- FAA and NATCA, Memorandum of Understanding on fatigue rules, 19 July 2024
- FAA, Notice N JO 7210.953 Basic Watch Schedule, effective 12 January 2025
- FAA, GENOT N JO 7210.966 Basic Watch Schedules, effective 1 January 2026
- FAA, Order JO 7210.3EE Facility Operation and Administration, with changes 1 to 3 (9 July 2026)
Compiled with care. No warranty is given that the information is correct, complete or up to date; the official texts prevail. This page is not legal advice.
Rostering
Plan the shifts. Keep the rules.
In a demo we show how Rostify plans a roster for air traffic controllers and checks every entry against ATS.OR.320.